Tribhuvan University, Institute of Engineering, Thapathali Campus
UGC Nepal accreditation badge
Accredited by UGC NepalUniversity Grants CommissionQuality Education Since 1967 A.D.

Finite element analysis of Epoxy/E-Glass composite material based mono leaf spring for light weight vehicle

Loading...
Thumbnail Image

Journal Title

Journal ISSN

Volume Title

Publisher

Thapathali Campus, Institute of Engineering, Tribhuvan University

DOI

10.3126/jiee.v4i2.39627

Abstract

A great deal of work is put into decreasing the fuel consumption of automotive vehicles, which may be accomplished by reducing the bulk of the vehicles. One component that may be explored is the leaf spring, which is extensively utilized in many sorts of cars, including electric ones. For the leaf spring, four distinct materials are considered: standard steel, Epoxy/E-Glass UD composite, Epoxy/E-Glass Wet composite, and Epoxy/S-Glass UD composite. The FEA study executed with the help of the ANSYS finite element code. Firstly, the 3-D model of the leaf spring with different thickness varying from 15mm to 65mm is designed using SolidWorks software which is then imported to the ANSYS software for the static analysis. Along with this, the finite element analysis under full load on 3-D composite multi leaf spring model is executed using ANSYS 2020 R1 by taking three different materials and then the result for the different static behaviour of the leaf spring are compared for all the materials assigned. In this paper we describe design and analysis of composite leaf spring. The leaf spring model used for this purpose is a rear leaf spring used in MAHINDRA “MODEL-COMMANDER 650 DI”. When compared to traditional steel, the mass of hybrid composite material is 62% lower. Hybrid composite materials have 36% lower equivalent (Von-Mises) stress than steel. Utlimately, the hybrid composite material may be employed as a leaf spring, decreasing the total weight of automobiles.

Description

Journal: Journal of Innovations in Engineering Education (JIEE), ISSN 2594-343X (print), 2773-823X (online) Volume/Issue: Vol. 4, Issue 2 (2021), pages 138-145 Article type: Research Article Published: 2021-12-15 DOI: https://doi.org/10.3126/jiee.v4i2.39627 Authors and affiliations: - Anil Mani Bhandari (Department of Automobile and Mechanical Engineering, Thapathali Campus, Institute of Engineering, Tribhuvan University, Thapathali, Kathmandu, Nepal) - Sudan Neupane (Thapathali Campus, Institute of Engineering, Tribhuvan University, Kathmandu, Nepal) - Ushan Adhikari (Department of Automobile and Mechanical Engineering, Thapathali Campus, Institute of Engineering, Tribhuvan University, Thapathali, Kathmandu, Nepal) - Sunil Risal (Department of Mechanical and Aerospace Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University, Lalitpur, Nepal) TCIOE department(s): Department of Automobile and Mechanical Engineering, Department of Industrial Engineering Publisher: Thapathali Campus, Institute of Engineering, Tribhuvan University License: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0), https://creativecommons.org/licenses/by-nc-nd/4.0/ Journal website: https://journal.tcioe.edu.np/articles/5556d982-153f-49f3-b137-a03b113e9312 NepJOL: https://www.nepjol.info/index.php/jiee/article/view/39627

Citation

Bhandari, A. M., Neupane, S., Adhikari, U., & Risal, S. (2021). Finite element analysis of Epoxy/E-Glass composite material based mono leaf spring for light weight vehicle. Journal of Innovations in Engineering Education, 4(2), 138-145. https://doi.org/10.3126/jiee.v4i2.39627

Endorsement

Review

Supplemented By

Referenced By

Creative Commons license